The relationship between flow rate of gear oil pump hydraulic system

Hydraulic valve is a common system in industrial manufacturing, which is suitable for controlling the flow direction of the oil in the hydraulic system, also can effectively regulate the pressure flow. There are three kinds of hydraulic fitting valves, namely pressure valve, direction valve flow valve. For valves of the same shape, the company can different functions according to the differences of their functions. Although there are various types of hydraulic valves, there are always basic similarities between the hydraulic parts of this kind of oil pump.

How to understand the relationship between flow rate of gear oil pump hydraulic system? In terms of the structural features of the hydraulic valve, all the hydraulic valves include the valve body, valve core the components that drive the action of the hydraulic valve core. The components here refer to the spring electromagnet. In fact, the basic principle of all hydraulic valves is the same. Their opening size, the pressure difference between the inlet outlet of the valve the flow through the valve must conform to the necessary proportion relationship, various hydraulic valves can control their own different parameters according to the reality.

Which requirements must the hydraulic valve of shaft sleeve casting meet in practical work? Experts believe that the hydraulic valve must be flexible, also to ensure the use of safe reliable, to ensure that the work of small shock vibration, in addition, the oil flow through the pressure to ensure less loss, good sealing performance. Compact structure is the most basic requirement of hydraulic valve, maintenance, installation, adjustment use are also very convenient, versatility is also strong. How to understand the relationship between the flow of gear oil pump the hydraulic system?

In order to ensure the routine work of the hydraulic system, the shaft sleeve casting manufacturer usually has to maintain the internal external parts of the hydraulic system, so before the operation of the new facilities, the hydraulic system must be guaranteed to be polluted. However, it is difficult to avoid the internal external pollution of the hydraulic valve in the operation process, so we must pay attention to the internal external maintenance of the components themselves. If there are burrs, chips other pollutants inside outside the new parts, it means that the parts are affected by abnormal storage handling. At this moment, the oil tank must be fully maintained, measures must be taken to remove the pollutants if necessary, so as to avoid the failure of the safety system caused by the operation of hydraulic parts.